不透光烟度计
一体化结构设计采用分流式取样技术、柴油机加速、减速和稳速时均可测量烟度数据自动线性化处理，可显示不透光度N、光吸收系数K和对应滤纸式烟度值SF高亮度数码显示；采用“空气幕”技术保护光学系统免受污染检测室自动恒温控制，可防冷凝而影响测试精度附自动时间显示,可选配转速测量和油温测量出现故障自动诊断显示所在单元；配内置打印机（或数字RS－232A接口或模拟接口）主要技术参数：测试烟度范围 暗度值0～99
- 型号： CN61M/HPC601
- 价格： 面议
- 货号： M229023
采用分流式取样技术、柴油机加速、减速和稳速时均可测量烟度
数据自动线性化处理，可显示不透光度N、光吸收系数K和对应滤纸式烟度值SF
高亮度数码显示；
采用“空气幕”技术保护光学系统免受污染
检测室自动恒温控制，可防冷凝而影响测试精度
附自动时间显示,可选配转速测量和油温测量
出现故障自动诊断显示所在单元；
配内置打印机（或数字RS－232A接口或模拟接口）
主要技术参数：
测试烟度范围 暗度值0～99.9%(相当烟度值0～10FSN)K:0-16.06m-1
准确性 ≤±2%(测量值)
稳定性 自动校零，量矩漂移≤±1%/4h
重复性 重复误差≤±1%
分辨力 0.1%
输出方式 数字直读显示，可附打印机打印烟浓度(暗度)蕞大值，测试时间、日期等。可附接口与计算机联网
测量烟度温度 70℃(自动恒温)，当温度误差≥±10%时，温度及错误指示灯亮
环境条件 温度0～40℃，相对湿度≤90%
电源 AC220v±10% 50Hz 消耗功率150VA
外形尺寸 （含支架） 160mm(深)×400mm(宽)×480mm(高)
重量 约8kg
Main Features:
◆Integrated Structural Design
◆Adopted a triage-type sampling technique, diesel engine acceleration, deceleration, and steady speed can be measured when the smoke
◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K and the corresponding value of filter paper-type smoke SF
◆High-brightness digital display;
◆Use of "air curtain" technology to protect the optical system from pollution
◆Automatic detection of room temperature control, anti-condensation can affect the testing accuracy
◆Automatically attached to the time display, and optional speed measurement and oil temperature measurement
◆Show where the failure of automatic diagnosis unit;
◆Equipped with built-in printer (or Bluetooth / RS232)
◆In line with ISO11614 and GB3847-2018 technical requirements.
Main technical parameters:
Test Scope：No light transmission N:0～100% (equivalent to smoke value 0~10FSN)
Light absorption coefficient K:0～16.06 m-1
RPM：0～9990rpm OIL TEMP: 0～150℃
Indication error: ≤±2% ( measured value)
Stability:moment drift≤±1%/4H
Repeatability ≤±1%
Resolution: N:0.1%, K:0.01m-1 ,RPM:10rpm, OIL TEMP:0.1℃
Output mode:digital direct reading, can be attached to the printer to print the smoke concentration ( darkness) maximum value, test time, date. Can interface with computer networking
The measurement chamber temperature:
70 ℃ (automatic), when the temperature error of ≥± 10%, temperature and error indicator light
And-use temperature: -5~50°C, Relative humidity: ≤90%
Power: AC100~240V 50/60Hz or DC12V, Power consumption: 150VA
Dimensions ( including bracket) :160 ( L)×400(W)×420 (H)mm
Weight: 8kg